Milan FWD V6-3.0L (2010)
Camshaft Gear/Sprocket: Specifications
RH Shown, LH similar
Tighten the 3 camshaft phaser and sprocket bolts to...................................................................................................................................18 Nm (159 lb-in).
NOTICE: Do not allow the camshaft to rotate from the neutral position while removing the camshaft phaser and sprocket or damage to
the engine may occur.
NOTE: Install a 3/8-in ratchet and extension into the D-slot on the rear of the intake camshaft to hold the camshaft in place for removal of the
camshaft phaser and sprocket bolts.
