mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/C - Stuck In 'HOT' Mode With A/C ON|Page 7008 > < A/C - Stuck In 'HOT' Mode With A/C ON
Page 2
background image

3. Reprogram the climate control module to the latest calibration using IDS release 62.09 and higher. This new calibration is not included in the VCM

2009.7 DVD. Calibration files may also be obtained at the website.

a. If the temperature on the passengers side remains in hot mode after DATC programming, proceed to Step 4.

b. If the temperature on the passengers side is corrected release the vehicle, do not continue with this procedure.

4. If vehicle was built on or before 4/6/2009 replace the right hand side temperature blend door and upper heater core and evaporator core housing

divider, refer to WSM, Section 412-01 under removal and installation of evaporator core procedure. If built after 4/6/2009 proceed to Step 5.

5. If vehicle was built on or after 4/6/2009 to 6/1/2009 replace the right hand side temperature blend door only per WSM, Section 412-01, under

Removal and Installation of Evaporator Core procedure.

If other abnormal conditions exist, follow normal diagnostics in WSM, Section 412-00. Return the vehicle to the owner and explain how the feature
works.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

091704A

2010 Fusion, Milan, Fusion

0.5 Hr.

Hybrid, Milan Hybrid And
MKZ: Reprogram Climate
Control Module Includes
Time To Perform
Diagnosis In This Article
(Do Not Use With Any
Other Labor Operations) 

091704B

2010 Fusion, Milan 2.5L,

4.1 Hrs.

Fusion Hybrid And Milan
Hybrid: Reprogram Climate
Control Module Includes
Time To Perform
Diagnosis In This Article
And Replace Right Hand
Side Temperature Blend
Door And Evaporator Core
Housing Divider If
Necessary (Do Not Use
With Any Other Labor
Operations)

091704B

2010 Fusion, Milan 3.0L

4.8 Hrs.

And Fusion 3.5L:
Reprogram Climate Control
Module Includes Time To
Perform Diagnosis In This
Article And Replace Right
Hand Side Temperature
Blend Door And
Evaporator Core Housing
Divider If Necessary (Do
Not Use With Any Other
Labor Operations)

A/C - Stuck In 'HOT' Mode With A/C ON|Page 7008 > < A/C - Stuck In 'HOT' Mode With A/C ON