mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Oil Pressure Sender > < Oil Change Reminder Lamp|Description and Operation
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

Message Center Configuration

Oil Life Reset - Non-Hybrid

NOTE: The oil life calculation is set at a maximum of approximately 12,070 km (7,500 miles) or 180 days (non-hybrid).

1.

Press and release the SETUP button 2 times to display OIL LIFE XXX% HOLD RESET = NEW.

2.

Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

Oil Life Start Value - Non-Hybrid

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 12,070 km (7,500 miles) or 180 days if the value
was previously changed, or to lower the value from the maximum (12,070 km [7,500 mile~ or 180 days) in 10% increments down to 10%.

1.

Press and release the SETUP button 2 times to display OIL LIFE = XXX% HOLD RESET = NEW.

2.

Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

3.

Release the RESET button then press and release the RESET button to lower the percentage by 10% (down to 10%) for each button press or
return the value to 100%.

Oil Pressure Sender > < Oil Change Reminder Lamp|Description and Operation