mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6320 > < Initial Inspection and Diagnostic Overview|Page 6318
Page 25
background image

-

Are the resistances greater than 10,000 ohms?

Yes

GO to K5.

No

REPAIR the affected circuit(s). TEST the system for normal operation.

-------------------------------------------------
K5 CHECK THE AC POWER POINT CIRCUITS FOR A SHORT TOGETHER

 

-

Measure the resistance between AC power point C2292-1, circuit HYA01 (OG/GN), harness side and C2292-3, circuit HYA02 (OG/WH), harness
side.

-

Is the resistance greater than 10,000 ohms?

Yes

GO to K6.

No

REPAIR the affected circuit(s). TEST the system for normal operation.

-------------------------------------------------
K6 CHECK THE AC POWER POINT FOR A SHORT TOGETHER

 

-

Measure the resistance between AC power point C2292-1, circuit HYA01 (OG/GN), component side and C2292-3, circuit HYA02 (OG/WH),
harness side.

Initial Inspection and Diagnostic Overview|Page 6320 > < Initial Inspection and Diagnostic Overview|Page 6318