Milan FWD V6-3.0L (2010)
-
Is the resistance greater than 10,000 ohms?
Yes
GO to K7.
No
INSTALL a new AC power point. TEST the system for normal operation.
-------------------------------------------------
K7 CHECK THE AC POWER POINT FOR AN OPEN
-
Measure the resistance between AC power point outlet side, pin 1 and AC power point C2292, pin-3, component side.
-
Measure the resistance between AC power point outlet side, pin 2 and AC power point C2292, pin-1, component side.
-
Are the resistances less than 5 ohms?
Yes
INSTALL a new DC/AC inverter. REFER to Direct Current/Alternating Current (DC/AC) Inverter See: Service and Repair/High Voltage
Converter/Inverter/Direct Current/Alternating Current (DC/AC) Inverter. TEST the system for normal operation.
No
INSTALL a new AC power point. REFER to Alternating Current (AC) Powerpoint See: Service and Repair/High Voltage
Converter/Inverter/Alternating Current (AC) Powerpoint. TEST the system for normal operation.
-------------------------------------------------
Pinpoint Test L: The DC/AC Inverter Does Not Operate Correctly - The AC Power Point LED
Indicator Is Never On
