Milan FWD V6-3.0L (2010)
-
Ignition OFF.
-
Disconnect: Negative Battery Cable .
-
Measure the resistance between the SOD-L C4230-2, circuit GD171 (BK/GY), harness side and ground.
-
Is the resistance less than 5 ohms?
Yes
GO to R3.
No
REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
R3 CHECK THE MS-CAN CIRCUITS BETWEEN THE SOD-L AND THE DLC FOR AN OPEN
-
Measure the resistance between the SOD-L C4230-4, circuit VDB06 (GY/OG), harness side and the Data Link Connector (DLC) C251-3, circuit
VDB06 (GY/OG), harness side.
-
Measure the resistance between the SOD-L C4230-3, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG),
harness side.
-
Are the resistances less than 5 ohms?
Yes
CONNECT the negative battery cable. GO to R4.
No
REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.