Milan FWD V6-3.0L (2010)
-------------------------------------------------
AC36 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE FCIM DISCONNECTED
-
Disconnect: Front Controls Interface Module (FCIM) C2402 (With Navigation, MKZ), C2403 (Without Navigation) or C2408 (With Navigation,
Except MKZ) .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AC57.
No
If the vehicle is equipped with a Front Display Interface Module (FDIM), GO to AC37.
If the vehicle is not equipped with an FDIM, GO to AC38.
-------------------------------------------------
AC37 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE FDIM DISCONNECTED
-
Disconnect: FDIM C2407 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AC58.
No
GO to AC38.
-------------------------------------------------
AC38 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE HVAC MODULE
DISCONNECTED
-
Disconnect: HVAC Module C2357a (Manual) or C2356a (Dual Automatic Temperature Control (DATC)) .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
