Milan FWD V6-3.0L (2010)
Tool
-------------------------------------------------
AD8 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE RCM DISABLED
-
Disconnect: SJB Fuse 32 (10A) .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuse. GO to Pinpoint Test E. See: Pinpoint Test E: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
No
INSTALL the removed fuse. For gasoline engine, GO to AD9. For hybrid, GO to AD10.
-------------------------------------------------
AD9 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE ABS MODULE DISABLED - GASOLINE ENGINE
-
Disconnect: Battery Junction Box (BJB) Fuse 42 (10A) .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuse. GO to Pinpoint Test B. See: Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool
No
INSTALL the removed fuse. If the vehicle is equipped with a 4X4 control module, GO to AD13.
If the vehicle is not equipped with a 4X4 control module, GO to AD14.
-------------------------------------------------
AD10 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE ACCM, DC/DC AND ABS MODULE DISABLED -
HYBRID
-
Disconnect: Battery Junction Box (BJB) Fuse 47 (10A) .
-
Enter the following diagnostic mode on the scan tool: Network Test .
-
Repeat the network test.
-
Do all other HS-CAN modules pass the network test?
Yes
INSTALL the removed fuse. GO to AD11.
No
INSTALL the removed fuse. If the vehicle is equipped with a 4X4 control module, GO to AD13.
If the vehicle is not equipped with a 4X4 control module, GO to AD14.
-------------------------------------------------
AD11 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE ACCM DISCONNECTED
