Milan FWD V6-3.0L (2010)
Engine Control Module: Customer Interest
Engine Controls - A/C Inoperative In High Temperatures
TSB 09-18-9
09/21/09
A/C SYSTEM LOSES COLD AIR FLOW - EXTREME
AMBIENT TEMPERATURES - SITTING AT IDLE -
DRIVING UNDER 4 MPH (6 KM/H) - BUILT ON OR
BEFORE 8/212009
FORD:
2010 Fusion
MERCURY:
2010 Milan
ISSUE
Some 2010 Fusion and Milan vehicles equipped with a 3.0L engines and built on or before 8/2/2009 may exhibit loss of air conditioning (A/C) system
operation during extreme hot ambient temperatures when vehicle is at base engine idle for extended periods of time, or when vehicle is driven during
extreme hot ambient temperatures below 4 MPH (6 Km/h) for extended periods of time. If vehicle concerns are not resolved with normal diagnostics
reprogram the Powertrain Control Module (PCM) with the latest level Integrated Diagnostic Services (IDS) calibration.
ACTION
Reprogram the PCM to the latest calibration using IDS release 62.11 and higher. This new calibration is not included in the VCM 2009.7 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
091809A
2010 Fusion, Milan:
0.3 Hr.
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
04
Disclaimer
