Milan FWD V6-3.0L (2010)
43. Apply 483 kPa (70 psi) of air pressure to the forward (1, 2, 3, 4) clutch piston port while recording the clutch pack clearance on the dial indicator.
The clearance should be between 0.076 mm (0.002 in) and 1.840 mm (0.072 in). If the clearance is out of range, check the forward (1, 2, 3, 4)
clutch pack for correct installation and the transaxle for correct assembly. See Figure 76.
44. Install the front planetary sun gear and shell assembly.
45. Install the No.10 front sun gear and shell assembly thrust bearing. See Figure 77.
46. Install the park pawl.
47. Install the park pawl pin and spring.
