Milan FWD V6-3.0L (2010)
55. Install the No.13 thrust washer. See Figure 81.
56. Install the differential planetary sun gear.
57. Install the differential assembly.
58. Install the No. 15 differential thrust bearing. See Figure 82.
59. Install the Turbine Shaft Seal Protector # 307-635 on the input shaft.
60. Clean the torque converter housing sealing surface.
61. NOTE: Be sure the sealing surfaces of the torque converter housing and the transaxle housing are free of oil before applying silicone.
Apply silicone (Motorcraft(R) TA-29 or equivalent) to the sealing surface of the transaxle case.
62. NOTE: Be sure the stud bolt is in the correct location as recorded during disassembly.
Install the torque converter housing on the transaxle case and install the 17 transaxle case-to-torque converter housing bolts. See Figure 83.
