Milan FWD V6-3.0L (2010)
22. Install RCM fuse 32 (10A) in the SJB.
23. Connect the battery ground cable. For additional information, refer to Battery.
Reactivation
All vehicles
1. Remove RCM fuse 32 (10A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.
4. Connect the LH side air curtain module electrical connector.
5. Install the LH C-pillar trim cover and retainer.
6. Install the LH C-pillar trim cover retainer cap.
7. Connect the RH side air curtain module electrical connector.
8. Install the RH C-pillar trim cover and retainer.
9. Install the RH C-pillar trim cover retainer cap.
10. Connect the passenger seat side air bag module electrical connector and slide and engage the seat side air bag electrical connector locking clip.
