Milan FWD V6-3.0L (2010)
5. Attach the Fuel Storage Tanker to the fuel drain tube and remove any residual fuel in the fuel tank filler pipe.
6. NOTE: Index-mark the fuel tank filler pipe hose and the clamp prior to removal for correct installation.
Release the clamp and disconnect the hose from the fuel tank filler pipe.
-
To install, tighten to 4 Nm (35 lb-in).
7. Insert a semi-rigid fuel drain tube into the fuel tank filler pipe hose until it enters the fuel tank.
8. NOTE: This step is to remove approximately one-half tank of the fuel from a completely full fuel tank, lowering the fuel level below the fuel level
sensor mounting flange.
Attach the Fuel Storage Tanker to the fuel drain tube and remove one-half (approximately 8 gallons) of fuel from the tank.
3.5L vehicles with more than one-half of a tank of fuel
9. NOTE: The supplemental refueling adapter is located in the luggage compartment.
Install the supplemental refueling adapter and a length of semi-rigid fuel drain tube into the Easy Fuel(TM) (capless) fuel tank filler pipe until the tube
enters the fuel tank.
10. NOTE: This step is to remove approximately one-half tank of the fuel from a completely full fuel tank, lowering the fuel level below the fuel level
sensor mounting flange.
Attach the Fuel Storage Tanker to the fuel drain tube and remove one-half (approximately 8 gallons) of fuel from the tank.
