Milan FWD V6-3.0L (2010)
-------------------------------------------------
B2 CHECK FOR DC/DC DTC P0AF7:00
-
Enter the following diagnostic mode on the scan tool: Self Test - DC/DC.
-
Is DTC P0AF7:00 reported?
Yes
GO to Pinpoint Test C. See: Pinpoint Test C: DTC P0AF7:00
No
GO to B3.
-------------------------------------------------
B3 CLEAR DTCs AND CARRY OUT SELF-TEST OF THE DC/DC
-
Using the scan tool, clear the DC/DC DTCs.
-
Enter the following diagnostic mode on the scan tool: Self Test - DC/DC.
-
Is DTC P0A94:4B reported?
Yes
INSTALL a new DC/DC. REPEAT the self-test. TEST the system for normal operation.
No
Concern is not present at this time. CHECK the MECS coolant level. REFER to Transmission Cooler, A/T.
CLEAR the DTC. REPEAT the self-test. TEST the system for normal operation.
-------------------------------------------------
Pinpoint Test C: DTC P0AF7:00
High-Voltage Converter/Inverter
Pinpoint Tests
