Milan FWD V6-3.0L (2010)
23. NOTE: Left side shown.
Remove the brake flexible hose bracket-to wheel knuckle bolts and position the hose and brackets aside.
24. NOTE:
-
Left side shown.
-
Apply the brake to keep the halfshaft from rotating.
Remove and discard the wheel hub nuts.
25. Using a wax pencil (or equivalent) apply witness marks to the vehicle and subframe to aid in installation.
26. Position the Powertrain Lift Table under the subframe.
27. Remove the 4 front subframe support bracket bolts.
28. Remove and discard the 4 front subframe nuts.
29. Partially lower the subframe.
30. NOTE: Left side shown.
Remove the rear lower arm-to subframe bolts.
-
Discard the bolt and washer.