Milan FWD V6-3.0L (2010)
5. Install the transmission fluid drain plug.
-
Tighten to 12 Nm (106 lb-in).
6. Disconnect the transaxle electrical connector.
7. Remove the transaxle electrical wiring harness retainers from the main control cover stud bolts.
8. Remove the 2 nuts, pull the transmission fluid cooler tube bracket and tubes away from the transaxle and position it aside.
9. NOTE: Note the location of the stud bolts for assembly.
Remove the 8 bolts, 5 stud bolts and the main control cover.
