Milan FWD V6-3.0L (2010)
LABOR ALLOWANCES
PARTS REQUIREMENTS / ORDERING INFORMATION
Order your parts requirements through normal order processing channels.
The DOR/COR number for this recall is 50421.
DEALER PRICE
For latest prices, refer to DOES II.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
In some of the affected vehicles, the retaining pin holding the park pawl rod guide may not be present in the transmission. If the retaining pin is not
present when the transmission is shifted into park, the park pawl rod guide may move out of position and not allow the park pawl to engage. Dealers are
to inspect for the presence of the retaining pin holding the park pawl rod guide and install a retaining pin as necessary.
INSPECTION
WARNING:
FAILURE TO APPLY THE PARKING BRAKE MAY RESULT IN VEHICLE DAMAGE AND/OR SERIOUS PERSONAL INJURY
1. Inspect for the presence of the park pawl rod guide retaining pin located near the transmission barcode label on top of the transmission. The height of
the retaining pin should be approximately 5 mm (1/4 in.) above the transmission housing boss. See Figure 1.
^
If the park pawl rod guide retaining pin IS PRESENT, no further inspection is necessary and this compliance recall is complete.
