Milan FWD V6-3.0L (2010)
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the screws and the underbody cover.
4. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
5. Install the transmission fluid drain plug.
-
Tighten to 12 Nm (106 lb-in).
6. Disconnect the transaxle electrical connector.
