Milan FWD V6-3.0L (2010)
10. Remove the transmission fluid fill plug.
11. Fill the transaxle with clean transmission fluid.
12. Install the transmission fluid fill plug.
-
Tighten to 39 Nm (29 lb-ft).
Differential Seals - RH
Differential Seals - RH, Front Wheel Drive (FWD)
Removal
NOTICE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage.
1. Remove the RH halfshaft. For additional information, refer to Drive Axles, Bearings and Joints.