Milan FWD V6-3.0L (2010)
Shift Interlock: Service and Repair
Brake Shift Interlock Override
NOTE: If it is necessary to use the override procedure to move the selector lever out of the PARK position, it is possible that a fuse has blown and the
brake lights are not operational. Before driving the vehicle, verify that the brake lights are working. This vehicle is equipped with a brake shift interlock
feature that prevents the selector lever from being moved out of PARK when the ignition is in the ON position unless the brake pedal is depressed.
If the selector lever cannot be moved out of the PARK position when the ignition is in the ON position and the brake pedal is depressed, carry out the
following procedure.
Fusion/Milan
1. Apply the parking brake.
2. Remove the selector lever trim ring.
3. Remove the center console trim panel
4. NOTE: Vehicles equipped with a 3.0L/3.5L shown, vehicles equipped with a 2.5L similar.
Using a suitable tool, push the brake shift interlock override forward, apply the brake, press the selector lever knob button and move the selector
lever into NEUTRAL.
5. Start the vehicle.
6. Install the center console trim panel.
