Milan FWD V6-3.0L (2010)
Transaxle Cooling - 6F35
Inspection and Verification
1. Verify the customer concern by operating the vehicle to duplicate the condition.
2. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
3. Install new components if a transmission fluid leak is found in any of the transaxle cooling components.
4. If the concern(s) remains after the inspection, determine the symptom(s). GO to Symptom Chart - Transaxle Cooling or GO to Symptom Chart -
NVH. See: Symptom Related Diagnostic Procedures/6F35/Symptom Chart - Transaxle Cooling See: Symptom Related Diagnostic
Procedures/6F35/Symptom Chart - NVH
