Milan FWD V6-3.0L (2010)
Transaxle Support Insulator - Anti-Roll
Transaxle Support Insulator - Anti-Roll
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the screws and the underbody cover.
Vehicles equipped with a 3.0L engine
3. Remove the Y-pipe. For additional information, refer to Exhaust System &/or Catalytic Converter.
All vehicles
4. Remove the 2 bolts and remove the roll restrictor.
Installation
