Milan FWD V6-3.0L (2010)
5. Connect the clutch master cylinder-to-clutch hydraulic tube.
-
Tighten the clutch hydraulic tube nut to 17 Nm (150 lb-in).
6. Install the PCM bracket and 3 PCM bracket nuts.
-
Tighten to 10 Nm (89 lb-in).
7. Install the PCM.
1. Install the 2 PCM bolts.
-
Tighten to 10 Nm (89 lb-in).
2. Connect the electrical connectors.
8. Install the battery tray. For additional information, refer to Battery.
9. Bleed the clutch hydraulic system. For additional information, refer to Manual Transmission/Transaxle &/or Clutch, M/T.