Montego AWD V6-3.0L VIN 1 (2005)
Trim Panel: Service and Repair
D-Pillar Trim Panel
D-PILLAR TRIM PANEL
Removal and Installation
1. Remove the 3rd row safety belt anchor-to-floor bolt cover from the rear quarter trim panel.
2. Remove the 3rd row safety belt anchor-to-floor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the D-pillar trim panel.
-
Pull the D-pillar trim panel toward the inside of the vehicle to release the retaining tabs.
4. To install, reverse the removal procedure.
