Montego AWD V6-3.0L VIN 1 (2005)
Power Mirror Motor: Service and Repair
EXTERIOR MIRROR MOTOR
Removal and Installation
1. Remove the exterior rear view mirror glass.
2. NOTE: The exterior mirror motor screws should not be completely removed from the exterior mirror motor assembly.
Completely loosen, but do not remove the 4 exterior rear view mirror motor screws.
-
To install, tighten to 1 Nm (9 lb-in).
3. Disconnect the exterior rear view mirror motor electrical connector.
4. Remove the exterior rear view mirror motor.
5. To install, reverse the removal procedure.
