Montego AWD V6-3.0L VIN 1 (2005)
4. NOTE: If necessary, lubricate the HO2S with lock lubricant to aid in removal.
Remove the HO2S from the exhaust manifold using the special tool and discard.
-
To install, tighten to 48 Nm (35 lb-ft).
5. NOTE: Do not reuse HO2S. If removed, a new sensor must be installed.
To install, reverse the removal procedure.
-
Apply a light coat of anti-seize lubricant to the threads of the HO2S.
