mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Sensors and Switches - Transfer Case > < Transmission Speed Sensor, CVT|Service and Repair|Page 5360
Page 5
background image

7. Install the fluid pan drain plug.

^

Tighten to 25 Nm (18 ft. lbs.).

8. Fill the transaxle with approximately 4.7 Liters (5 quarts) of clean CVT automatic transmission fluid. Use the transmission fluid level setting

procedure to fill the transaxle. 

Sensors and Switches - Transfer Case > < Transmission Speed Sensor, CVT|Service and Repair|Page 5360