mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Air Bag Systems|Service and Repair > < Passenger Air Bag Module|Page 8039
Page 1
background image

Air Bag: Description and Operation

Driver Air Bag Module

NOTE:  References to the driver air bag module must not be confused with the side (seat-mounted) air bag components of the supplemental restraint
system (SRS).

The driver air bag module:
-

is steering-wheel mounted.

-

is a dual-stage air bag, deploying at 1 of 2 different rates depending upon impact severity, safety belt usage and driver seat position.

-

will deploy upon receiving a flow of current from the restraints control module (RCM).

-

has no subassemblies.

Passenger Air Bag Module

NOTE:  References to the passenger air bag module must not be confused with the side (seat-mounted) air bag components of the SRS.

The passenger air bag module:
-

is a dual-stage air bag, deploying at 1 of 2 different rates depending upon impact severity and safety belt usage.

-

will deploy upon receiving a flow of current from the RCM.

-

is installed as an assembly.

-

is mounted in the right side of the instrument panel.

Safety Canopy Module

WARNING:  Anytime the safety canopy module has deployed, the headliner, and all A-, B-, C- and D-pillar upper trim panels and attaching
hardware must be replaced along with any other damaged components and hardware. Failure to do so can result in personal injury in the
event of a safety canopy module deployment.

NOTE:
-

If the headliner has the word "AIR BAG" embossed on it near each B-pillar, the vehicle is equipped with safety canopy modules.

-

Safety canopy modules equipped on Five Hundred and Montego vehicles have a single squib (safety canopy module squib 1 only). Safety canopy
modules equipped on Freestyle vehicles have a dual squib (safety canopy module squib 1 and safety canopy module squib 2).

The safety canopy module:
-

will deploy upon receiving a flow of current from the restraints control module (RCM) initiated by the side impact sensors and internal RCM
circuitry when a side impact or vehicle rollover condition is detected.

-

is installed as an assembly.

-

is mounted above the headliner.

-

attaches from the A-pillar frame to the D-pillar frame (Freestyle).

-

attaches from the A-pillar frame to the C-pillar frame (Five Hundred and Montego).

-

cannot be interchanged from side to side.

Air Bag Systems|Service and Repair > < Passenger Air Bag Module|Page 8039