Montego AWD V6-3.0L VIN 1 (2005)
4. When the wire clip is reset correctly, it should appear as shown.
-
Make sure the wire clip hook ends are evenly spaced from the center post.
5. Make sure the driver air bag module wire clip is fully seated on all of the tabs and guides.
All vehicles
6. Connect the horn and accessories electrical connectors.
7. CAUTION:
-
The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module. Match the
electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air bag
module.
-
Make sure the driver air bag module wiring is routed clear of the driver air bag mounting hooks on the steering wheel so that the
wiring is not pinched during driver air bag module installation.
Connect the driver air bag module electrical connectors as noted in removal.
