Montego AWD V6-3.0L VIN 1 (2005)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
Removal and Installation
1. Place the steering wheel in the straight-ahead position and remove the ignition key.
2. Remove the driver air bag module.
3. Remove and discard the steering wheel bolt.
^
To install, tighten to 40 Nm (30 ft. lbs.).
4. Remove the steering wheel.
^
Route the 2 driver air bag module electrical connectors through the steering wheel.
5. To install, reverse the removal procedure.
^
Install the driver air bag module.
