mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Valve Body, CVT|Service and Repair|Page 6168 > < Valve Body, CVT|Service and Repair|Page 6166
Page 7
background image

8. CAUTION:  Make sure that the fluid filter pickup tube seal was removed from the bore when the filter was removed. Failure to remove the seal

prior to installing the new filter will result in transaxle failure.

CAUTION:  Make sure that the transmission fluid filter is fully seated into the bore. If the filter is not correctly installed, internal transaxle damage
will occur.

Install a new fluid filter and seal assembly.

9. Make sure that the filter is seated over one of the mechatronic bolts.

10. Install a new fluid pan gasket.

Valve Body, CVT|Service and Repair|Page 6168 > < Valve Body, CVT|Service and Repair|Page 6166