mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Transfer Case > < Four Wheel Drive Selector Switch|Description and Operation

Montego AWD V6-3.0L VIN 1 (2005)

Page 1
background image

Output Yoke/Flange: Service and Repair

Output Flange 

Removal and Installation 

1. Remove the driveshaft. 

2. Remove the output flange nut.

^

To install, tighten to 100 Nm (74 ft. lbs.).

3. Remove the output flange.
4. To install, reverse the removal procedure.

Relays and Modules - Transfer Case > < Four Wheel Drive Selector Switch|Description and Operation