Monterey V6-4.2L VIN 2 (2004)
9. Attach restraint system diagnostic tool 418-F403 to the vehicle harness side of the passenger side safety canopy module electrical connector.
10. Disconnect the passenger seat side air bag module electrical connector, located beneath the seat.
1
Slide and disengage the passenger seat side air bag module electrical connector locking clip.
2
Push in to release the tab and disconnect the passenger seat side air bag module electrical connector.
11. Attach restraint system diagnostic tool 418-133 to the vehicle harness side of the passenger seat side air bag module electrical connector.
12. Disconnect the passenger safety belt buckle pretensioner electrical connector, located beneath the seat.
1
Slide and disengage the passenger safety belt buckle pretensioner electrical connector locking clip.
2
Push in to release the tab and disconnect the passenger safety belt buckle pretensioner electrical connector.
13. Attach restraint system diagnostic tool 501-097 to the vehicle harness side of the passenger safety belt buckle pretensioner electrical connector.
14. Remove the LH C-pillar trim panel.
15. Remove the coat hook near the LH C-pillar trim panel.
16. From between the headliner and the roof of the vehicle, just to the front of the C-pillar, disconnect the driver side safety canopy module electrical
connector.
17. Attach restraint system diagnostic tool 418-F403 to the vehicle harness side of the driver side safety canopy module electrical connector.
18. Disconnect the driver seat side air bag module electrical connector, located beneath the seat.
1
Slide and disengage the driver seat side air bag module electrical connector locking clip.
2
Push in to release the tab and disconnect the driver seat side air bag module electrical connector.
19. Attach restraint system diagnostic tool 418-133 to the vehicle harness side of the driver seat side air bag module electrical connector.
20. Disconnect the driver safety belt buckle pretensioner electrical connector, located beneath the seat.
1
Slide and disengage the driver safety belt buckle pretensioner electrical connector locking clip.
2
Push in to release the tab and disconnect the driver safety belt buckle pretensioner electrical connector.
21. Attach restraint system diagnostic tool 501-097 to the vehicle harness side of the driver safety belt buckle pretensioner electrical connector.