mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Heater Hose > < Heater Core|Front|Page 3607
Page 1
background image

Heater Core: Service and Repair
Auxiliary

HEATER CORE - AUXILIARY

REMOVAL

NOTE:  If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.

1. Remove the LH quarter trim panel.

2. Remove the parts in the order indicated in the illustration and table.

Item 5: Heater Hose Clamps Removal Note

1. NOTE:  Position the heater core tubes over a suitable drain pan to prevent coolant from spilling into the vehicle.

Clamp off and disconnect the heater hoses from the heater core.

INSTALLATION

1. To install, reverse the removal procedure.
2. Fill the engine cooling system.

Heater Hose > < Heater Core|Front|Page 3607