Monterey V6-4.2L VIN 2 (2004)
Part 2 Of 2
To remove individual parts, only carry out the listed steps:
4. To install, reverse the removal procedure.
5. Fill and bleed the cooling system.
Item 6: Thermostat Removal Note
1. Mark the location of the vent pin before removing the thermostat.
Item 3: Thermostat Housing-to-Engine Bolts Installation Note
1. Tighten the thermostat housing-to-engine bolts in two stages.
^
Stage 1: Tighten to 8 Nm (71 inch lbs.).
^
Stage 2: Tighten an additional 60 degrees.