Monterey V6-4.2L VIN 2 (2004)
Part 4 Of 4
6. Remove the parts in the order indicated in the illustrations and tables.
7. To install, reverse the removal procedure.
8. Fill and bleed the cooling system.
Item 4: Cable Bracket Stud Bolt Removal Note
1. Remove the engine harness retainer from the stud bolt.
Item 17: LH Spark Plug Wire Assembly Removal Note
1. CAUTION: Spark plug wires must be connected correctly. Mark the spark plug wires before removing them.
CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wires.
With a twisting motion, use the special tool to pull the spark plug wires from the spark plugs and the ignition coil.
2. Remove the pin-type retainers and the spark plug wires as an assembly.
