Monterey V6-4.2L VIN 2 (2004)
5. Install the timing chain, crankshaft gear and camshaft gear as an assembly.
6. Make sure that the timing marks and the keyways are aligned.
7. Remove the retaining pin.
8. Install the synchronizer drive gear.
Items 16-10: Engine Front Cover Installation Note
1. CAUTION: In order to prevent foreign material from contaminating the engine block or the engine front cover, it is necessary to seal the coolant
and oil passages of both components. Failure to follow these directions will result in engine damage.
CAUTION: Do not use a surface conditioning pad or any other type of fibrous abrasive disc to clean the gasket surfaces. Failure to follow these
directions will result in engine damage.
