Monterey V6-4.2L VIN 2 (2004)
3. Using the special tools, install the crankshaft front seal.
Item 8: Crankshaft Pulley Installation Note
1. Lower the RH side of the subframe 50.8 mm (2 inch)
-
Remove the bolts.
-
Lower the subframe.
2. NOTE: Apply a bead of sealant to the keyway in the crankshaft pulley.
Using the special tool, install the crankshaft pulley.
3. Raise the subframe into position, then install the bolts.
4. Connect the RH front anti-lock brake wheel sensor electrical connector.
