mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Canister Purge Control Valve|Diagrams|Page 4599 > < Canister Purge Control Valve|Diagrams|Page 4597
Page 1
background image

Canister Purge Control Valve: Service and Repair

EVAPORATIVE EMISSION CANISTER AND PURGE VALVE

REMOVAL

WARNING:

-

The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents
the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, which can cause a fire or explosion if fuel vapor or liquefied fuel are present in the area. Failure to follow these instructions
can result in personal injury.

-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.

1. If removing the canister purge valve, remove the cowl panel.
2. If removing the evaporative emission canister, with the vehicle in NEUTRAL, position it on a hoist.
3. Disconnect the battery ground cable.

Canister Purge Control Valve|Diagrams|Page 4599 > < Canister Purge Control Valve|Diagrams|Page 4597