Monterey V6-4.2L VIN 2 (2004)
Fuel Injector Wiring Harness: Service and Repair
FUEL CHARGING WIRING HARNESS
REMOVAL
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near fuel-related components. Highly flammable
mixtures are always present and may be ignited. Failure to follow these instructions can result in personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the
fuel lines or fuel system components the fuel system pressure must be relieved. Failure to follow these instructions can result in personal
injury.
1. Disconnect the battery ground cable.
2. Remove the upper intake manifold.
3. Remove the parts in the order indicated in the illustration and table.
Item 5: Fuel Charging Wiring Harness Removal Note