mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Technician Safety Information|Page 7494 > < Technician Safety Information|Page 7492
Page 5
background image

1. Release the recliner handle cover tab and remove the cover.

Item 9: Side Air Bag Module Connector Removal Note

1. Separate the side air bag module electrical connector and wire harness pin-type retainers from the seat riser and cushion pan.

Item 10: Climate Control Seat Duct Removal Note

1. NOTE:  Due to seat options, some components, connectors and harnesses may or may not be present.

If equipped, separate the climate control duct and disconnect the backrest thermal electric device electrical connector.

2. NOTE:  Due to seat options, some components, connectors and harnesses may or may not be present.

If equipped, disconnect the seat cushion heated seat element.

Item 22: Backrest Trim Cover Removal Note

1. WARNING:  Front seat back trim covers installed on seats equipped with side air bags cannot be repaired, they are to be replaced

(cleaning is permissible).

Release the seat back trim cover lower J-clips.

Technician Safety Information|Page 7494 > < Technician Safety Information|Page 7492