mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seat Belt|Removal and Installation|Page 7627 > < Seat Belt|Removal and Installation
Page 2
background image

striking components near the front or side air bag sensors or RCM, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.

The front impact severity sensor is located under the hood latch bracket.

The first row side impact sensors (if equipped) are located under the seat, beneath the carpet.

The second row side impact sensors (if equipped) are located at or near the base of the C-pillar.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable and wait at least one minute.

2. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the

supplemental restraint system (SRS) deactivation/reactivation procedure. Refer to Air Bag(s) Arming and Disarming.

When servicing the safety belt buckle pretensioner, deactivate the supplemental restraint system.

3. When servicing the safety belt buckle pretensioner, remove the affected seat from the vehicle.

Seat Belt|Removal and Installation|Page 7627 > < Seat Belt|Removal and Installation