Monterey V6-4.2L VIN 2 (2004)
1. Grasp the belt tongue and pull the belt webbing down to form a loop through the upper (longer and narrower) slot in the tongue.
2. Rotate and fold the belt webbing over itself within the slot to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the belt tongue.
4. Grasp the belt tongue and pull the belt webbing up to form a loop through the lower slot in the tongue.
5. Rotate and fold the belt webbing over itself within the slot to remove the twist.
6. Pull the excess belt webbing through the slot.
7. The safety belt tongue should face inward when completed.
Deployed
SAFETY BELT PRETENSIONER DISPOSAL - DEPLOYED
1. WARNING: The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle
and when handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical
connector. Doing so could result in pretensioner or air bag deployment and could result in personal injury.
Dispose of the deployed safety belt pretensioner in the same manner as any other part to be scrapped.
Inoperative
SAFETY BELT PRETENSIONER DISPOSAL - UNDEPLOYED, INOPERATIVE
WARNING:
-
The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.
-
Carry a live safety belt retractor pretensioner or safety belt buckle pretensioner so as to keep fingers and clothing away from moveable
