mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Impact Sensor|Removal and Installation|Page 2587 > < Impact Sensor|Removal and Installation|Page 2585
Page 10
background image

7. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure

to remove could result in injury and possible violation of vehicle safety standards.

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure

8. Check the active restraint system for correct operation.

Item 3: Safety Belt Anchor Installation Note

1. NOTE:  Make sure the safety belt webbing is not twisted prior to installation.

Position the safety belt anchor and install the bolt.

Impact Sensor|Removal and Installation|Page 2587 > < Impact Sensor|Removal and Installation|Page 2585