Monterey V6-4.2L VIN 2 (2004)
Part 3 Of 3
5. Remove the parts in the order indicated in the following illustration and table.
To remove individual parts, only carry out the listed steps:
6. To install, reverse the removal procedure.
7. Fill and leak test the system.
Item 1: Lower Reservoir Isolator Bolt Removal Note
1. Loosen the bolt and detach the reservoir from the isolators.
Item 2, 3, 5, 13, 17, 21, 23, 25 and 27: Power Steering Line Removal Note
1. It may be necessary to disconnect the power steering lines to remove the individual components.
