mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 6715 > < Interior - Under Column Access Door Warped/Broken|Page 6710
Page 1
background image

Steering Gear: Service and Repair
Removal and Installation

Steering Gear 

Special Tool(s) 

NOTE:  New Teflon seals must be installed any time the lines are disconnected from the steering gear.

1. CAUTION:  When repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the

power steering components can result.

CAUTION:  Do not allow the steering wheel to rotate while the intermediate shaft is disconnected or damage to the clockspring can result. If
there is evidence that the shaft has rotated, the clockspring must be removed and recentered. 

Hold the steering wheel in the straight-ahead position using a suitable holding device.

2. Place the vehicle on a hoist. Make sure that the transmission is in NEUTRAL. 

Steering Gear|Removal and Installation|Page 6715 > < Interior - Under Column Access Door Warped/Broken|Page 6710