Monterey V6-4.2L VIN 2 (2004)
Item 1: Front Axle Wheel Hub Retainer Installation Note
1. CAUTION: Install and tighten the new axle wheel hub retainer to specification in a continuous rotation. Stopping the rotation during installation
will cause the nylon lock to set incorrectly. This will cause incorrect torque readings while tightening the retainer and lead to bearing failure.
Always install a new retainer after loosening the retainer or when the retainer has not been installed to specification in a continuous rotation.
CAUTION: Never use power tools to tighten the axle wheel hub retainer.
NOTE: Apply a small patch of sealant to the last five outboard CV joint threads.
Install a new axle wheel hub retainer.
^
Remove the steel rod from the brake disc.
