Monterey V6-4.2L VIN 2 (2004)
Front Door Window Glass: Adjustments
DOOR WINDOW GLASS ADJUSTMENT
1. Remove the front door trim panel and watershield.
2. Partially lower the front door window glass to within three inches of the full up position.
3. Loosen the nut and washer assemblies.
4. Open the front door.
5. Gently pull the front door window glass fully rearward into the door top glass run.
6. Tighten the nut.
7. NOTE: If the hole is a vertical slotted hole, make sure that the nut and washer assembly is positioned at the bottom of the slot before downward
pressure is applied to the window regulator equalizer arm bracket.
Apply downward pressure on the window regulator equalizer arm bracket.