Mountaineer V8-302 5.0L VIN P EFI (1998)
2
Remove the lower instrument panel steering column cover.
8. Remove the instrument panel steering column opening cover reinforcement.
1
Remove the screws.
2
Remove the instrument panel steering column opening cover reinforcement.
9. Remove the transceiver assembly.
1
Remove the screw.
2
Locate the rib on the steering column lock cylinder housing, and gently pry the anti-theft transceiver over the rib.
NOTE: Only apply pressure or leverage below the key cylinder lower rib.
3
Disconnect the electrical connector.
NOTE: The steering wheel is shown removed for clarity.
INSTALLATION