Mountaineer V8-302 5.0L VIN P EFI (1998)
Keyless Entry Key-Pad: Description and Operation
The keyless entry keypad can be used to unlock the driver door or lock and unlock all the doors and the liftgate. It also lights the keypad lamp, allows
one user code to be programmed and issues illuminated entry on/off requests to the GEM when locking and unlocking.
The system (permanent) entry code is located on the owner's wallet card in the glove box; it is also electronically accessible by asking for the RAP
KEYCODE PID on the NGS Tester and on the receiver assembly housing.
The receiver assembly is programmed at the factory with a five-digit entry code. A replacement receiver assembly includes a new owner's code card.
To turn on the interior lamps and light all illuminated components, press any button on the keyless entry keypad.
To program a temporary access code:
^
Enter the permanent code on the keyless entry keypad.
^
Press the 1/2 button within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
^
Enter alternate 5-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 button and entering the first digit.
To unlock the driver door, enter the permanent factory code or enter the owner's alternate code.
To unlock the passenger door(s) and liftgate, press the 3/4 button within five seconds of unlocking the driver door.
To lock all doors, press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.) This will turn off courtesy lamps.
